Author Archives: Robinson Plumbing & HVAC

What Do You Do If You Smell Gas?

If you smell gas in your house, it could indicate a leak.

When you smell gas in your house

Gas leaks are a serious danger and usually if you smell gas in your house, this is the first indication you have a gas leak and your gas line needs repair.

Of course the first thing to check if you smell gas is the burners on the stove. If they are on, you may smell gas if it’s left unattended. In that case, shut off the burner, ventilate the house by opening the doors and windows, turn on the range hood fan, if at all possible leave the house until the gas smell is gone.

If your burner is off, then you may have a leak in your gas line. In that case, get away from the house, call your fire department and the gas company to report the possible leak. The fire department or gas company will have to shut off the gas before any gas line repairs can be made.

If you need gas line repair in Smyrna, GA, Robinson Plumbing & HVAC is the team to call. To schedule service call (404) 549-6888.

Causes for gas line damage

Here are some of the common causes of gas line damage:

  • Faulty or damaged gas appliances: Aging seals that connect water heaters, stoves and other gas appliances can corrode and cause leaks.
  • Poor piping: Faulty, worn, and eroded pipes allow gas to seep into the home.
  • Lack of ventilation: Poor ventilation on large appliances like heaters can cause a build-up of gasses.

How much does it cost to repair a gas line?

When you report a suspected gas line leak to your gas company, the gas company will not charge you for shutting the gas off. Gas line repair costs will vary according to the extent of the damage.

A gas line on a water heater may be one cause for a gas leak.

Cost of gas line repair

Gas line repair costs will vary once the source of the leak is determined. For a line connecting a single appliance costs could range from $150 to $650, while extensive repairs underneath your home could run anywhere between $3,000 to $6,000.

Once the gas line is repaired, you may have to pay to replace any faulty or damaged appliances like stoves, water heaters or gas furnaces. You can expect to pay anywhere between $400 to $5,000 depending on the type of appliance you’re replacing.

When you need affordable gas line repairs, make sure to call the team at Robinson Plumbing & HVAC.

Gas line repair house

When you have a gas leak at your house, you’ll need to get the gas line repaired fast, by expert technicians like those at Robinson Plumbing & HVAC. We also recommend a regular inspection of your home’s gas lines to assess the condition.

Do plumbers repair gas lines?

Yes, plumbers like the qualified technicians at Robinson Plumbing & HVAC repair gas lines. If you have a gas line in need of repair, make sure you hire a qualified professional who has trained for gas line repair services. Not all plumbers are trained for gas lines. So you want a trained professional in the same way you’d want a trained professional for any job from installing vinyl siding to building a roof.

Who works with gas lines?

Besides licensed plumbers, a heating and cooling professional can install and repair gas lines. Installing a gas line can be dangerous work, so you will want to make sure the technician you hire is licensed and insured to do the job properly.

Gas line repair and installation

Hiring a licensed and insured plumber or HVAC technician will ensure your gas line repair and installation is done properly. When a gas line is installed the technician will also be available to make sure there are no supply problems afterwards.

Who would install a gas line?

Any plumber or HVAC technician trained and licensed for gas systems can install a gas line. If you are uncertain about who can install a gas line, you can check with your gas company.

Gas line repair kit

Never try to install or repair a gas line yourself. It can be dangerous work and without the right materials and training you can risk fire or even explosions and other dangers. If you are searching for gas line repair kits, you may see fuel line repair kits available for cars. This is a totally different thing.

Is a gas leak covered by homeowners insurance?

You may have some protection available for gas leaks covered by your insurance policy. Some policies give you partial coverage for areas like garages, but most policies will not cover gas leaks caused by faulty appliances or poor maintenance. You may be able to add a rider to your policy for areas of concern.

Check with your individual insurance company to see what is covered when it comes to gas leaks.

Call for repairs

If you are smelling gas in your home and suspect you need gas line repair in Smyrna, GA, make sure to get gas line repairs done as soon as possible by reliable and licensed professionals like those at Robinson Plumbing & HVAC. For service call us at (404) 549-6888.

How Long Does Plumbing Last

Trained experts can expedite your repipe needs.

Most home and business owners don’t think about their plumbing while it’s working. We take our different fixtures, faucets, and piping for granted until something breaks. The minute we step into the shower and the water won’t turn on, or won’t drain, suddenly your plumbing is the main thing on your mind. Or maybe you’re thinking about remodeling your kitchen or your bathroom. Plumbing is a major concern in both of those rooms, so naturally, you’d be concerned about whether or not you can install all of your new fixtures and cabinets over the old plumbing, or if you should have plumbers repipe the entire area first. Most people who aren’t trained and certified plumbers have a lot of questions before large renovation projects. Lots of people ask “What is best pipe for plumbing?” or “what is the difference between lining vs repiping?” Experts in the field can answer these questions or more, which is why you should always ask for a professionals opinion before undertaking any large projects that will affect your plumbing.

Types of Plumbing

If you’re getting new plumbing for a room or for your entire house, you should learn a little bit about each type of pipes used in repipe jobs. Each kind has their own pros and cons, but it’s up to you to decide what type best fits your needs for your home or business.

If you're going to repipe a room in your house, you should hire a professional.
  • Copper This is still a common type of pipe for plumbing. Copper is metal, durable, is less prone to corrosion than other types of metal pipes used in repipe jobs. They are also very easy to recycle. Copper plumbing lasts approximately 50 – 70 years, unless it’s buried in acidic soil that will reduce its lifespan. It is also more expensive than the other types of plumbing.
  • Polyvinyl Chloride PVC pipes are popular because they’re cheaper than copper pipes. They’re almost as durable for a fraction of the price. They also last approximately 50 years, sometimes longer with proper care. Since they’re made of plastic, they can’t corrode. They can become blocked or damaged at the joints.
  • Cross-Linked Polyethylene PEX piping is becoming more and more popular in repipe jobs for several reasons. It’s incredibly durable and it’s easy to ship because it’s a flexible material. This is a great option for repipe jobs that include retrofitting plumbing inside of existing walls or floors because it is so malleable. It also lasts roughly the same time as PVC pipes, so about 50 years.
  • Galvanized Steel This isn’t used in most modern plumbing because of all of the cons that come with it. However, we still list it because homes built between the 1930’s and 1980’s could contain galvanized steel plumbing. If you think your home may have these kind of pipes, you should consider hiring a professional service for whole house repiping.

How Does Repiping Work

If you’re interested in resin lining your pipes to help slow down potential leaks inside your plumbing, you should know that it’s a temporary fix that has future potential health implications. Repiping is a more long term solution than lining the inside of your plumbing with epoxy and resin to help seal any corroded areas and leaking spots. Repiping usually requires disconnecting pieces, sections, or entire lines of plumbing, and replacing them with something new. If you’re remodeling a part of your home, or the entire thing, then it might be time to consult some professional repiping companies. They can answer questions like “How long does it take to repipe a whole house?” If you find yourself asking “What is the best way to remodel a bathroom?”, then a professional service can help you pick out all of the different things you’ll need to make your dream bathroom a reality, and whether or not you’ll need to repipe the room. Bathroom remodeling is stressful on you because it takes away the modern conveniences that come with that bathroom being out of commission. That means no access to the toilet, the sink, or the shower. These are services we need access to daily, so when you undertake a bathroom remodel, you want your plumbers to be able to answer “How long do bathroom renovations take?” Most professionals can replace individual fixtures relatively quickly, but an entire bathroom remodel with repipe service can take four to five weeks. That’s four to five weeks where you won’t have access to your bathroom, and workers will be in and out of your home or office working on your bathroom.


Repiping a Bathroom

Repipe jobs are complicated and take one or more of your rooms out of commission.

Repiping a bathroom isn’t an easy task. The water has to be shut off and the new materials have to replace the old materials. Then there’s the price tag. But how much does it cost to change plumbing in bathroom? That really depends on what kind of repipe materials you choose. An entire bathroom fitted with new copper pipes costs between 8,000 to 10,000 dollars on average, while a PEX repipe job may only cost 4,000 to 6,000 dollars. Your soil may not be the right type for copper piping, or you may live in a place where it gets incredibly cold and frozen pipes could cause pipe bursts. Your bathroom may be bigger or smaller than the average, or may have it’s own set of issues that affect final costs. These are all potential issues that someone with experience can help you figure out ahead of time. That’s why you should consult professional plumbers since they can help you determine the specifics. If you work with someone who knows what they’re doing, your plumbing can be installed to maximize its lifespan as well efficiency. For more information about professional repipe services in Smyrna, GA, or if you’re interested in what Robinson Plumbing & HVAC can do for you, give us a call at (404) 549-6888.

Is Copper Better Than PEX?

PEX Pipe Running Through the Interior of a Structure.

PEX Pipe Is an Ideal Solution for Any Plumbing Application.

The creation of PEX pipe represented a revolution in plumbing. This tubing is a polyethylene cross-linked creation that stands as a superior option for both hydronic and radiant systems in homes and businesses. A skilled plumber can install PEX piping faster than any other piping, and it requires no adhesives that necessitate breathing apparatuses or a ventilated space. Flexible and highly durable, PEX is resistant to conditions that would cause copper or PVC tubing to burst. Available in different colors to easily distinguish between the piping’s use, PEX is affordable, durable, and easy to repair and install.

Though it’s been in use for over 30 years, PEX pipe still represents unfamiliar territory for many people. The main reason for this comes from the persistent use of rigid piping. Unfortunately, many owners of home and businesses still believe that CPVC and copper represent better choices for their pipes. Put simply, they do not. PEX is superior in almost every way. and is cheaper, to boot. At Robinson Plumbing & HVAC, we believe in the quality of PEX piping, and recommend its use for any approved application. To learn more about our service with PEX pipe in Smyrna, GA, give us a call today at (404) 549-6888.

What Is PEX Pipe Used For?

PEX pipe is used in residential and commercial plumbing applications. It has approval for cold and hot water distribution systems, municipal water lines, heating systems that function through radiant panels, hydronic heating systems in baseboards, systems to melt snow and ice, and piping for building services. Generally speaking, it can replace CPVC and copper piping in every way in which they see use. One thing that PEX does not have approval for is forced air applications. PEX is also not approved for outdoor applications, as exposure to UV radiation can damage the piping.

In addition to its wide usage, PEX makes every project simply easier. Unlike rigid piping, it comes in large rolls, so you do not have to connect different segments. It is also flexible, and so can go around corners without the need for angle pipes. It does not require adhesives, and can employ both clamp and slip-fit connectors. It cuts quickly and cleanly, resists bursting from freezing temperatures, and does not decay or degrade when used for approved applications.

Are PEX Pipes Safe?

Is PEX water pipe safe to drink from? Absolutely. PEX pipe is 100 percent safe for use in drinking water applications. PEX meets Standard 61 from the NSF and ANSI, the measurement for safety in drinking water distribution. In fact, a study from the Norwegian Institute for Public Health disproved every false rumor about PEX’s effects on drinking water. The study showed that:

  • PEX comes with zero associated health risks in regards to drinking water.
  • Some PEX piping will affect the taste of water, but only if the water sits static in the piping for a long period of time. If your plumbing sits unused for a long period of time, simply run a tap to disperse the impacted water.
  • Of the 10 types of PEX piping tested, only two affected the taste of water.
  • Brand-new PEX piping only leaked a minimal amount of volatile compounds.

PEX Pipes vs Copper

PEX Pipe Connected to Copper Pipe.

PEX Is Better Than Copper Piping in Practically Every Way.

When compared to copper piping, PEX is superior in almost every way. The only associated benefit with copper piping is that some people prefer the taste of its water. However, as explained above, PEX has virtually no measurable effect on the taste of water, unless it sits within the pipe for a long period of time. PEX has a long list of advantages over copper piping. A partial list of its advantages include:

  • Fewer Health Risks: The breakdown of copper piping has a measurable correlation to heart disease and Alzheimer’s. PEX also requires no toxic adhesives or solvents.
  • Greater Durability: PEX piping resists corrosion and electrolysis, and also mineral buildup. It also resists bursting at temperatures that would destroy other piping.
  • Enhanced Energy Efficiency: PEX piping better retains the heat of hot water, which saves energy.
  • Lower Cost: PEX piping costs much less than copper piping , and does not come with associated risks of theft.

PEX Pipe FAQ

How Long Does PEX Last For?

The average lifespan of PEX extends beyond 50 years. The chief global manufacturer of PEX, Uponor, claims a 100-year or longer lifespan.

Do PEX Pipes Need to Be Insulated?

Though PEX pipes are more resistant to freezing temperatures, you should still have them insulated for added durability.

What Temperature Can PEX Withstand?

When used for heating applications, PEX can withstand 200 degree Fahrenheit temperatures. For plumbing, it can withstand temperatures up to 180 degrees Fahrenheit. For cold water, it can resist below-freezing temperatures up to a certain point. When temperatures fall below 20 degrees Fahrenheit, make sure that you have your PEX insulated, and that you heat your structure to at least 55 degrees Fahrenheit.

Do PEX Pipes Burst?

While your roof might or driveway might benefit from pressure washing, your crawlspaces will not see any advantages with a hosing from a burst pipe. Like any other type of piping, PEX can also burst. The material has greater tolerance for the conditions that commonly lead to burst pipes, however. Unlike rigid piping, PEX can expand and contract with changing temperatures, and so has a level of tolerance for freezing water.

Does PEX Contain BPA?

No, PEX does not contain BPA, and is 100 percent safe for drinking water applications.

Is Your Heater Ready for Winter?

An HVAC Technician Inspecting a Gas Furnace Before He Cleans it.

Annual Furnace Maintenance Ensures Your Furnace is in Good Condition.

As the weather starts to get colder, it’s important that your furnace is working properly. One of the best ways to do this is by getting annual furnace maintenance. What is furnace maintenance? Furnace maintenance is where you inspect, clean, or repair your furnace so it operates effectively. Maintenance for your heating system can extend the life of your furnace, increase its energy efficiency, and avoid furnace repair. When your furnace doesn’t have proper maintenance performed at least once a year, its guaranteed to have some sort of system breakdown. But what can go wrong with a furnace?

Because your furnace is comprised of many parts, there are several ways a furnace can become damaged. Things like clogged filters, a burner that won’t lite, high pitched sounds, or its blowing cold air, are things that need to be looked at right away. Knowing when to get maintenance for your furnace can be the difference between repairs or a complete replacement. In order to avoid furnace repair and replacement, below is valuable information we have collected in order to educate our clients about furnace maintenance.

How Often Should You Have Your Furnace Serviced?

While your furnace needs maintenance once a year, we recommend that you get biannual furnace maintenance, once in the fall and once in the spring. With maintenance twice a year, HVAC technicians are able to provide furnace inspection, as well as cleaning. In the fall you will want to get it done to see if there are any issues that need to be addressed, and getting it inspected in the spring can determine if its still in good condition from being used all winter. By getting annual or biannual maintenance for your furnace, you are able to benefit in several ways.

  • Lower Bills: Who doesn’t want lower heating bills? Routine maintenance is able to make this happen. The reason maintenance helps lower your bills is that an HVAC technician will provide heater tune up, where they are able to modify anything in your furnace so that it works more efficiently. A furnace that works efficiently means the parts in the furnace aren’t working so hard, therefore your furnace doesn’t have to work so hard.
  • Meet Your Heating Needs: When it gets really cold, we want to crank that heat way up. However, when a furnace works too hard, it’s not able to work the way it should. Maintenance improves the way it performs, enabling it to meet your heating needs.
  • A decrease in Repairs: Assessing and cleaning your furnace once or twice or years gives HVAC contractors the ability to find small issues in your furnace. With lack of maintenance, problems can get worse, but with regular maintenance, you can avoid costly repairs.
  • Extended Lifespan: Getting your furnace inspected and cleaned ensures that it is able to last a lot longer. Furnaces that don’t get maintenance end up breaking down way faster.

If you’ve read through this list and you are asking yourself, “Should I get a furnace tune up? The answer is probably yes. If you haven’t had one in quite some time, it is probably the time to get one.

How Long Does Furnace Maintenance Last?

A Man Is Adjusting a Thermostat as a Part of an Inspection

A Furnace Maintenance Checklist is Very Thorough and Ensures Technicians Work On Every Part.

Typically, furnace maintenance is going to last about one to two hours. This is because an HVAC technician is going to have to inspect and clean every area of your furnace. If you want to be sure that every part in your furnace is working as it should, then its important that your HVAC technician is completely thorough. Because it’s a long service, we know that planning for it can be tough. However, any good HVAC technician will work with you to find a time that is convenient for your schedule. When you have a technician come out and perform furnace maintenance, they will usually go by a standard furnace maintenance checklist. This checklist will include inspections and cleaning but the checklist broken down will include

  • Check Burners: Flames in the burner should be checked to make sure the flames are blue and not yellow.
  • Clean Blower: Because the blower gets clogged with debris and dust, it will need to be cleaned in order for it to work effectively.
  • Replace Filter: We will check the filter to see if its clogged and replace it with a new one.
  • Lubricate Parts: Various parts in your furnace are mechanical, so they will need to be lubricated in order to prevent friction.
  • Examine Heat Exchanger: The heat exchanger can cause a lot of problems if it’s broken, so it’s an important component to inspect.
  • Check Airflow: This ensures there is no sign of carbon monoxide.
  • Check Air Vents: This is to determine if there are any leaks or if the vent is blocked
  • Check the thermostat: The thermostat ensures the furnace is working, so it’s important to make sure it’s working as it should.

Whether you need furnace or roof inspections, it’s important to go to a professional. If you are looking for furnace maintenance and repair in Smyrna, GA, please call Robinson Plumbing & HVAC at (404) 549-6888.

How To Repair Your Air Conditioner

man calling for air conditioner repair

Call Us For Air Conditioner Repair Services Today!

You should be able to forget about your air conditioning unit during its 10 year lifespan if it is running correctly, rarely having to repair it. But if you are constantly having to call for a technician, then replacing your unit would be more economical and less stressful. There are a lot of parts in your HVAC system that all make it work properly. From your Air Vent air ducts to your Kenmore air conditioner, there are plenty of things that could break down and require repairs. Sometimes it can be hard to find exactly what is wrong. You have air ducts, filters, the indoor and outdoor air conditioning units all that could possibly be the source of malfunction. If you do need air conditioner repair in Smyrna, GA, you can call the Robinson Plumbing & HVAC technicians at (404) 549-6888. Identifying where the repairs will need to take place can help you determine what may be wrong and give you an estimate of how much the maintenance will be.

Signs You Need Air Conditioner Repair

  • If you hear squealing, grinding, or any other noises from your unit, your fan belt has come loose.
  • Your compressor could be failing if you are experiencing hot or little air blowing out of your vents. Minimal air could also be an indicator that your air ducts are clogged or leaking and air is escaping or not being able to be circulated around the home.
  • The most obvious sign you need air conditioner repair is if your electricity bill suddenly skyrocketed, often doubling in price. As HVAC units already account for half of your energy bill, if they begin accumulating more energy, something is broken in the unit, causing it to work harder and use more power. Broken parts could be a leaky duct, a broken thermostat, or an old unit.

Signs You Have a Hidden Plumbing Leak in Your House

Signs You Have a Hidden Plumbing Leak in Your House

Unsure If You Have a Plumbing Leak? There Are Some Signs To Look Out for If You Think You Have a Leak.

Leaks are one of the worst things that can happen to your plumbing. When they aren’t found right away, they can cause you a lot of money in repair or a complete replacement. If you think you have a plumbing leak but aren’t sure, read below to find out what the signs indicate you have a hidden leak in your home’s plumbing.

Meter Continually Runs

A good way to check if you have a plumbing leak is to check your water meter. You will want to record what it says and then shut off all the water in your home. When you come back in an hour and the meter is still running, that means you have a leak somewhere.

High Water Bill

If you have been using your water like you regularly do but your water is a lot higher than it usually is, this could also be a sign that there is a leak in your house’s plumbing.

Water Damage

Another sign that there is a hidden leak is if there is water damage. We usually get water damage when it’s flooding, but we typically know when our houses have large amounts of water on the floor, ceiling, or walls. If you see water stains on the floors, walls, ceiling, or warped areas of your home, then a leak might be present.

Mold and Mildew Infestation

When the water damage on your floors, ceilings, or walls hasn’t been cleaned or if water is hidden in your home, it can produce mold and mildew. This is another big sign that there is a hidden leak somewhere in the plumbing.

If you would like leak detection and leak repair in Smyrna, GA, call Robinson Plumbing & HVAC at (404) 549-6888!