Is Your Heater Ready for Winter?

An HVAC Technician Inspecting a Gas Furnace Before He Cleans it.

Annual Furnace Maintenance Ensures Your Furnace is in Good Condition.

As the weather starts to get colder, it’s important that your furnace is working properly. One of the best ways to do this is by getting annual furnace maintenance. What is furnace maintenance? Furnace maintenance is where you inspect, clean, or repair your furnace so it operates effectively. Maintenance for your heating system can extend the life of your furnace, increase its energy efficiency, and avoid furnace repair. When your furnace doesn’t have proper maintenance performed at least once a year, its guaranteed to have some sort of system breakdown. But what can go wrong with a furnace?

Because your furnace is comprised of many parts, there are several ways a furnace can become damaged. Things like clogged filters, a burner that won’t lite, high pitched sounds, or its blowing cold air, are things that need to be looked at right away. Knowing when to get maintenance for your furnace can be the difference between repairs or a complete replacement. In order to avoid furnace repair and replacement, below is valuable information we have collected in order to educate our clients about furnace maintenance.

How Often Should You Have Your Furnace Serviced?

While your furnace needs maintenance once a year, we recommend that you get biannual furnace maintenance, once in the fall and once in the spring. With maintenance twice a year, HVAC technicians are able to provide furnace inspection, as well as cleaning. In the fall you will want to get it done to see if there are any issues that need to be addressed, and getting it inspected in the spring can determine if its still in good condition from being used all winter. By getting annual or biannual maintenance for your furnace, you are able to benefit in several ways.

  • Lower Bills: Who doesn’t want lower heating bills? Routine maintenance is able to make this happen. The reason maintenance helps lower your bills is that an HVAC technician will provide heater tune up, where they are able to modify anything in your furnace so that it works more efficiently. A furnace that works efficiently means the parts in the furnace aren’t working so hard, therefore your furnace doesn’t have to work so hard.
  • Meet Your Heating Needs: When it gets really cold, we want to crank that heat way up. However, when a furnace works too hard, it’s not able to work the way it should. Maintenance improves the way it performs, enabling it to meet your heating needs.
  • A decrease in Repairs: Assessing and cleaning your furnace once or twice or years gives HVAC contractors the ability to find small issues in your furnace. With lack of maintenance, problems can get worse, but with regular maintenance, you can avoid costly repairs.
  • Extended Lifespan: Getting your furnace inspected and cleaned ensures that it is able to last a lot longer. Furnaces that don’t get maintenance end up breaking down way faster.

If you’ve read through this list and you are asking yourself, “Should I get a furnace tune up? The answer is probably yes. If you haven’t had one in quite some time, it is probably the time to get one.

How Long Does Furnace Maintenance Last?

A Man Is Adjusting a Thermostat as a Part of an Inspection

A Furnace Maintenance Checklist is Very Thorough and Ensures Technicians Work On Every Part.

Typically, furnace maintenance is going to last about one to two hours. This is because an HVAC technician is going to have to inspect and clean every area of your furnace. If you want to be sure that every part in your furnace is working as it should, then its important that your HVAC technician is completely thorough. Because it’s a long service, we know that planning for it can be tough. However, any good HVAC technician will work with you to find a time that is convenient for your schedule. When you have a technician come out and perform furnace maintenance, they will usually go by a standard furnace maintenance checklist. This checklist will include inspections and cleaning but the checklist broken down will include

  • Check Burners: Flames in the burner should be checked to make sure the flames are blue and not yellow.
  • Clean Blower: Because the blower gets clogged with debris and dust, it will need to be cleaned in order for it to work effectively.
  • Replace Filter: We will check the filter to see if its clogged and replace it with a new one.
  • Lubricate Parts: Various parts in your furnace are mechanical, so they will need to be lubricated in order to prevent friction.
  • Examine Heat Exchanger: The heat exchanger can cause a lot of problems if it’s broken, so it’s an important component to inspect.
  • Check Airflow: This ensures there is no sign of carbon monoxide.
  • Check Air Vents: This is to determine if there are any leaks or if the vent is blocked
  • Check the thermostat: The thermostat ensures the furnace is working, so it’s important to make sure it’s working as it should.

Whether you need furnace or roof inspections, it’s important to go to a professional. If you are looking for furnace maintenance and repair in Smyrna, GA, please call Robinson Plumbing & HVAC at (404) 549-6888.